{Chrysler 300} 300k starting issue

[Michael Van der veen <michaelvanderveen8@xxxxxxxxx>]

Hi all,

I've been test driving the silver turquoise 300k around and trying to iron out some running issues. So after driving around for a couple of hrs it cut out and I couldn't start it via the key. I know there can be issues with the bulkhead connector, there is no power to the ignition switch and no console light comes on when you open the door.  No fuses are blown and you can start the car by bridging the terminals on the starter relay and connecting the coil to the battery. When you do this the car will run and drive and lights in the console work when you open the door.  The ignition switch still won't work. The car has 42k miles on it and alot of electrical parts have been replaced.  Does anyone have any ideas besides the bulkhead connector?  

Thanks in advance for any help you can provide

Cheers,

Mike approaching summer heat, in Australia 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPtwmMGxjOcin1kNLF7k0Gax%2BbfZTWkPMrV1n-Hk-3E8SBm4GA%40mail.gmail.com.