RE: {Chrysler 300} 64 sill plate screws

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Alan,

 

I will go into the garage in a couple of hours and see what I have bagged and tapped to my sills.

 

James

 

From: 'ALLAN POZDOL' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, October 30, 2024 09:08
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} 64 sill plate screws

 

So, opening the bag of screws I removed from my sill plates quite some time ago, I find a mismatch of screws. There are three chrome button head philips. I suspect these are meant to go on the flat part of the sill. There would be eight in total.

 

Could someone confirm? Thanks!

 

Allan

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/595902474.350335.1730304492664%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617153AB9500AFC2D9FE2C3A93542%40CY5PR19MB6171.namprd19.prod.outlook.com.