RE: {Chrysler 300} WCFB carb kits
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} WCFB carb kits



Personal experience:  Jim McGowan at the Quad Shop   jimsquadshop.com   did a great job restoring the WCFB carbs for my 1957 300C, including the Chrysler Tech Bulletin that called for special modifications and jetting changes.  The modified carburetors came back with the correct original phosphate finish on the carb bodies and excellent zinc plated linkages.  Yes, it took two months and cost ~ $1100 ten years ago, but the car now idles and runs better than it ever did in the last 30 years!

 

Ray Melton   Las Cruces, NM     1957 300C cvt   white/Gauguin  “Big Red”  s/n 3N572517

************************************************************************************

 

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of John Grady
Sent: Friday, September 6, 2024 2:57 PM
To: Ron Waters <ronbo97@xxxxxxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} WCFB carb kits

 

daytona does a terrible rebuild job . absolutely  terrible . You need to withdraw that recommendation Ron . 

here is why : 

l had a wcfb they “ rebuilt “ — instead  of re bushing the worn shaft they wrapped .001 shim stock 360  around it , left the  shaft worn ( the real problem with wcfb , is hole in carb body wears , causing erratic vacuum leak at idle ) Otherwise excellent stable carbs . 

this shim later got sucked sideways into throat ,the edge of it was  holding throttle plates open such that idle  adjustments  did not work and varied all over the place . To add injury , the lack  of a full close of throttle  exposed the ported advance above the throttle plate to vacuum at times , advancing the timing , which raises idle  “ depending” on moon light or not . Want a challenge? 

 

 

FYI on this,  there should be negligible vacuum at idle in vacuum  line  on all mopars . — or more to the point ignition timing should not move as you connect the line at idle . Possible exception is ram cars . a design mistake there imho , no ported vacuum . 

This WCFB took me two long months to figure out , in and off 4 x , but did not stop them  from collecting my  400 to throughly screw up my carb . 

not only don’t  go there , RUN away . Crooks imho . They deserve this review. 

Kits from Mikes Carbs are really good and they answer your questions too . within hours 

The bushing reamer and new bushings are 39$ on ebay . You are 360$ ahead . 



On Sep 6, 2024, at 4:08 PM, 'Ron Waters' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



Another vote for Daytona Carburetor kits. Or they will rebuild them for you.

 

Ron

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of dplotkin
Sent: Friday, September 06, 2024 2:14 PM
To: finsruskw@xxxxxxxxxxxxxxx; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} ACFB carb kits

 

Daytona Carburetor sells kits.

 

Dan

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 

-------- Original message --------

Date: 9/6/24 2:06 PM (GMT-05:00)

To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

Subject: {Chrysler 300} ACFB carb kits

 

Where can I get 'em??

Have a pair of carbs from a D I plan to restore.

Anyone have their carbs rebuilt by anyone lately?

They gotta be getting parts and kits from somewhere. 

 

Dave Schwandt

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/247672054.185299614.1725645968480.JavaMail.zimbra%40windstream.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/66db465d.050a0220.778b4.d757SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001601db0098%247644c910%2462ce5b30%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/986794F2-71A7-4F9C-B4EC-8B2CCF368817%40gradyresearch.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/SJ0PR20MB5341FD8CEBE269CF98CAFC96C09E2%40SJ0PR20MB5341.namprd20.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.