Re: {Chrysler 300} Follow up on shift cable request

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

right — one slides in and out to adjust ( early one )  later has star wheel on thread with bolt holes . Factory manual way to set it is a joke .

I set by put in N , read ohms or test light on starter neutral switch  to ground . come at it from both sides , find exact center of contact made , snug down . has to be perfect on rooster comb 

Sent from my iPhone

On May 27, 2024, at 5:27 PM, Gary Gettleman <gary.gettleman@xxxxxxxxx> wrote:



Have attached photo of the rebuilt torqueflight that was supposed to be a '57 but casting # 1854220-2 & date code 4/15/59 indicate 1959 unit.

The connection of push button shift cable to a '57 C vs 59 torqueflight is different. Factory changed the casting feature for how you install cable.

Thanks

   gary gettleman 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACN-kqPNrE8YhjBd%3D61S758Kjwwx16jeZM1zaY_yO3yC87FviA%40mail.gmail.com.

<20240510_145937.jpg>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/B3D46559-F9D9-4977-B978-78E3D666BC77%40gradyresearch.com.