Re: [Chrysler300] Rear Axle Tapered shims

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

Good morning Rolland,

So what's going on that you need to tinker with spring perch wedges? 2 degrees ain't much, so I think you must be either perfecting something or chasing an issue.

Did anyone else help you out already? Otherwise I think I may have a set for you. I'd need to check, and will gladly do so if you are still without. Just let me know.

Keith Boonstra

-

On Thu, Mar 20, 2014 at 10:20 AM, <RWestra@xxxxxxx> wrote:

 

Anyone know who provides the tapered shims that go between the rear leaf springs and the axle block to change the rear U Joint angle.  I need two 2 degree shims.

 

Thanks.

 

                                                                                Rolland Westra

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___