RE: [Chrysler300] Rear Axle Tapered shims

["John Grady" <jkg@xxxxxxxxxxxxxxxxx>]

Surprisingly expensive, but got a kit from MOPAR parts, I think, for that (some years ago) ; you might consider making at machine shop.

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of RWestra@xxxxxxx
Sent: Thursday, March 20, 2014 9:21 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Rear Axle Tapered shims

 

Anyone know who provides the tapered shims that go between the rear leaf springs and the axle block to change the rear U Joint angle.  I need two 2 degree shims.

 

Thanks.

 

                                                                                Rolland Westra

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___