[Chrysler300] Universal Joint Star

[Ronald Kurtz <mark6268@xxxxxxxxxxxxx>]

Hello, Everyone:

I need to replace the rear unversal joint on my '64, but noticed the space for 
the joint on the differential yoke is greater than what's required on the end of 
the dive shaft. Stars with equal distance between the center and the end of the 
four arms are too short to be properly placed in the yoke.

Any suggestions or recommendations? Is there a specific part number for which I 
should be looking? Thanks in advance for any/all responses.

Best,
Ron Kurtz
E #292

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/