Re: [Chrysler300] Transmission Wet Burps on a '57

["Don Verity" <d.verity@xxxxxxx>]

This is correct. On the cast iron TF and PF it is on the top of the extension housing. It is pressed in, and can't be removed with the part in place. A quick check would be to see if the "hat" on top moves freely. If it is stuck or tight, it may be plugged. I have seen this on a few transmissions I have done.
Don Verity


    
  As far as I know, ALL automatic transmissions have vents. I saw a GM tranny 
  with a blocked vent blow the dipstick out and put several quarts of fluid 
  into the engine compartment.

  Troy Mc"K"enzie

  On Tue, 13 Sep 2011 22:16:08 -0400



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/