
Re: [Chrysler300] 413 stuttering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] 413 stuttering
- From: "Bob Haag" <Scooter465@xxxxxxx>
- Date: Thu, 14 Jul 2011 14:48:38 -0400
I had a simaliar problem with a fresh rebuilt Carter Thermoquad rebuilt by Holly Corp.
To get to the point if the pump bore is worn and has a smooth shiny surface you can get a week pump spray.
I removed the top of carb and removed check valve plug at the bottom and shure enough the bore was shiny probably from the plating process they used when they rebuilt it.I took some polishing paper and roughed up the bore it should be like a freshly honed cylinder in a engine.
This got rid of the stumble and provided a solid steam of fuel through the whole throttle range.
Hope this helps.
Bob Haag
----- Original Message -----
From: 2HsandaHeritage@xxxxxxxxxxx
To: Chrysler 300 Club International
Sent: Thursday, July 14, 2011 1:03 PM
Subject: [Chrysler300] 413 stuttering
Hi Group,
My 62 Sport has a 413 with a single Carter AFB.
The Carter AFB has recently been rebuilt.
When starting from a dead stop the engine "stutters" for a few seconds and then performs like new.
I had the same problem prior to having the AFB rebuilt.
If I "hit the gas" harder at start up there is no "stutter" and the "stutter" seems to get slightly worse when the engine reaches operating temperature.
The automatic choke appears to be operating correctly.
Thanks in advance for your help,
Doug Warrener
Fair Oaks, CA
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap