RE: [Chrysler300] 413 DISTRIBUTOR CAP

["dean berolzheimer" <wallingtonmotorlines@xxxxxxxxxxx>]

Negative, the piston will come up twice to TDC per each revolution of the
distributor, you're working on a 4 cycle. It doesn't matter where you start
with the wires as long as you have the sequence (firing order) correct. Of
course a concours judge might throw you out of the tent.

 

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Dave Schwandt
Sent: Sunday, May 15, 2011 4:08 PM
To: zzub@xxxxxxx; 2HsandaHeritage@xxxxxxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 413 DISTRIBUTOR CAP

 

  

I think of you crank the motor and find #1 TDC, the rotor will be pointing 
at the #1 plug wire location.

Dave Schwandt

----- Original Message ----- 
From: <2HsandaHeritage@xxxxxxxxxxx <mailto:2HsandaHeritage%40comcast.net> >
To: <zzub@xxxxxxx <mailto:zzub%40cox.net> >
Cc: <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> >
Sent: Saturday, May 14, 2011 8:34 PM
Subject: Re: [Chrysler300] 413 DISTRIBUTOR CAP

Hi George,

I ran into the same problem recently with my 62 Sport.

I have a tune up diagram that shows the distributor and where to place the 
plug wires in relation to the clips.

Unfortunately, this diagram is only correct for a Chrysler built distributor

like the dual point one on my H.

The distributor on my 62 Sport is a prestolite or autolite unit and the plug

wire placement has a different relationship to the clips.

If you have the prestolite/autolite single point distributor, then the #1 
plug wire is located one space clockwise from the left clip.

If you have the Chrysler dual point distributor, then the #1 plug wire is 
located two spaces clockwise from the left clip.

Hope this helps,

Doug Warrener

Fair Oaks, CA

----- Original Message ----- 
From: zzub@xxxxxxx <mailto:zzub%40cox.net> 
To: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> 
Sent: Saturday, May 14, 2011 3:32:10 PM
Subject: [Chrysler300] 413 DISTRIBUTOR CAP

Can anyone tell me which plug wire goes to the first postion right (CW) of 
the notch of the cap? I changed caps and may have mis-aligned the wires. The

wires are in the correct sequence. Thanks in advance.

George Ver Berkmoes
El cajon, CA Sunny 76 degrees

[Non-text portions of this message have been removed]

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> 

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx
<mailto:bob%40simplexco.com>  or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave Group" button

For list server instructions, go to 
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups 
Links





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/