Re: [Chrysler300] Exhaust Manifold Gaskets

[mwl1967@xxxxxxx]

Whenever I came across engines never previously torn down they also never  
had exhaust manifold to head gaskets. The rebuild kits supplied them and as 
a  teenager I remember being told that the metal side goes to the manifold 
since it  gets hotter than the head. That's the way I've been assembling 
them. Also, over  the years I've found warped manifolds that needed surfacing 
both on the cylinder  head side as well as the pipe flange side. 
 
Actually trying to get an exhaust leak fixed on my Charger in time for  
MoPars at the Strip next weekend. Can't take 300 (pun intended) continuous 
miles  of tick-tick-tick
 
Mike Laiserin
 
 
 
In a message dated 4/3/2011 11:01:16 A.M. US Mountain Standard Time,  
mark6268@xxxxxxxxxxxxx writes:

 
 
 
Hello, everyone:

After 50 years of working on cars, I am  beginning to forget what came 
naturally 
to me about cars. I have a pair of  exhaust manifold gaskets that I am 
installing 
on a B block, one side is  metallic and the other side is soft gasket 
material. I 
took this engine  appart some 30 years ago. Which side goes up against the 
engine  
block? Any help would be appreciated before I attempt put them on the  
intake 
manifold. Thanks.

Regards,
Ron Kurtz
E  #292

[Non-text portions of this message have been  removed]






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/