[Chrysler300] Re: Terminal blocks

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

Hold the fort.  I think I may have located a few 5-post terminal blocks 
like the originals with the 4.5" c-c holes.  I'll have them in a day or 
two and let you know if they look right.

Keith Boonstra

-

Dave Schwandt wrote:
> *I think you will find the 6 pin strip spacing between one of the 
> mounting holes and the terminal (#6) on the far end is 4.5".  My 
> original plan was to remove the unwanted terminal and make that 
> the mounting hole, then cut to the proper length.*
> ** 
> *Many thanks to Rich for picking up the ball on this.*
>  
> *Dave Schwandt* 
>
>     ----- Original Message -----
>     *From:* Richard Barber <mailto:C300@xxxxxxx>
>     *To:* 'Dave Schwandt' <mailto:finsruskw@xxxxxxxxxxxxxxx> ; 'Warren
>     Anderson' <mailto:wranderson@xxxxxxxxxxxxx> ; 'richard_e_osborne'
>     <mailto:richard@xxxxxxxxxxxx> ; 'Keith Boonstra'
>     <mailto:kboonstra@xxxxxxxxxxxx>
>     *Cc:* 'list server' <mailto:Chrysler300@xxxxxxxxxxxxxxx>
>     *Sent:* Monday, July 12, 2010 2:31 PM
>     *Subject:* Terminal blocks
>
>     *The Pollak terminal blocks are still available in 4, 6, 8 or 10
>     gang configuration and the part numbers are unchanged.  *
>
>     *See:  http://tinyurl.com/2bx4kja       The Pollak HQ response
>     (shown below) was to guide me to a local distributor who was very
>     helpful.*
>
>     * *
>
>     *I ordered out a 6-gang unit for $3.87 just to document it for the
>     clubs.  It is not currently available in 5-pin configuration and
>     the mounting holes are on 5.25" centers as compared to 4.5" for
>     our 5-pin terminals on our 300's.  I'm going to inquire as to the
>     feasibility of making these available in 5-gang configuration with
>     4.5" spacing on the mounting holes.*
>
>     * *
>
>     Thank you for your interest in Pollak Products.
>
>     Based on your inquiry, the Pollak distributor nearest to you is:
>
>      
>
>     The Lighthouse
>
>     19813 Cabot Blvd
>
>     Hayward, CA  94545
>
>     Contact:      (510) 783-8910
>
>     It has been a pleasure to serve you.
>
>     Sincerely,
>
>      
>
>     Pollak Aftermarket Services
>     300 Dan Road
>     Canton, MA  02021
>
>     Phone: (781) 830-0340
>     Fax: (781) 575-8964
>     WEB: www.pollakaftermarket.com <http://www.pollakaftermarket.com>
>
>     * *
>
>     *From:* Richard Barber [mailto:C300@xxxxxxx]
>     *Sent:* Saturday, July 03, 2010 3:38 PM
>     *To:* 'sales@xxxxxxxxxxxxxx'
>     *Cc:* 'list server'
>     *Subject:* Joseph Pollak Part No. 52-245
>
>      
>
>       As members of the Chrysler 300 Clubs, we have viewed a product
>     produced by the former Joseph Pollak Corp. of Boston and are
>     wondering if it is still available, and more importantly, is a
>     similar five-pin terminal block available?  A picture of product
>     52-245, a six-pin terminal strip, and its container are shown
>     below.  If one or both items are available, could you please quote
>     price (single and in quantity), availability and dimensions
>     between the mounting holes?  Please advise if you sell these
>     direct or through a dealer network.
>
>      
>
>     Thank you for this service.
>
>      
>
>     Sincerely,
>
>      
>
>     *6-pin terminal block.jpg*
>
>     * *
>
>     */Rich Barber/*
>
>     *1801 Redwine Terrace*
>
>     *Brentwood, CA 94513-6000*
>
>     *Home:  925-513-6583*
>
>     *Cell:  925-783-4893*
>
>     *Fax:  925-513-6573*
>
>      
>
>      
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/