[Chrysler300] Re: Terminal blocks

["Dave Schwandt" <finsruskw@xxxxxxxxxxxxxxx>]

I think you will find the 6 pin strip spacing between one of the mounting holes and the terminal (#6) on the far end is 4.5".  My original plan was to remove the unwanted terminal and make that the mounting hole, then cut to the proper length.

Many thanks to Rich for picking up the ball on this.

Dave Schwandt 
  ----- Original Message ----- 
  From: Richard Barber 
  To: 'Dave Schwandt' ; 'Warren Anderson' ; 'richard_e_osborne' ; 'Keith Boonstra' 
  Cc: 'list server' 
  Sent: Monday, July 12, 2010 2:31 PM
  Subject: Terminal blocks


   
  The Pollak terminal blocks are still available in 4, 6, 8 or 10 gang configuration and the part numbers are unchanged.  

  See:  http://tinyurl.com/2bx4kja       The Pollak HQ response (shown below) was to guide me to a local distributor who was very helpful.

   

  I ordered out a 6-gang unit for $3.87 just to document it for the clubs.  It is not currently available in 5-pin configuration and the mounting holes are on 5.25" centers as compared to 4.5" for our 5-pin terminals on our 300's.  I'm going to inquire as to the feasibility of making these available in 5-gang configuration with 4.5" spacing on the mounting holes.

   

  Thank you for your interest in Pollak Products. 

  Based on your inquiry, the Pollak distributor nearest to you is: 

   

  The Lighthouse 

  19813 Cabot Blvd 

  Hayward, CA  94545 

  Contact:      (510) 783-8910 

  It has been a pleasure to serve you. 

  Sincerely, 

   

  Pollak Aftermarket Services 
  300 Dan Road 
  Canton, MA  02021 

  Phone: (781) 830-0340 
  Fax: (781) 575-8964 
  WEB: www.pollakaftermarket.com 

   

  From: Richard Barber [mailto:C300@xxxxxxx] 
  Sent: Saturday, July 03, 2010 3:38 PM
  To: 'sales@xxxxxxxxxxxxxx'
  Cc: 'list server'
  Subject: Joseph Pollak Part No. 52-245

   

    As members of the Chrysler 300 Clubs, we have viewed a product produced by the former Joseph Pollak Corp. of Boston and are wondering if it is still available, and more importantly, is a similar five-pin terminal block available?  A picture of product 52-245, a six-pin terminal strip, and its container are shown below.  If one or both items are available, could you please quote price (single and in quantity), availability and dimensions between the mounting holes?  Please advise if you sell these direct or through a dealer network.

   

  Thank you for this service.

   

  Sincerely,

   



   

  Rich Barber

  1801 Redwine Terrace

  Brentwood, CA 94513-6000

  Home:  925-513-6583

  Cell:  925-783-4893

  Fax:  925-513-6573

   

   


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/