Re: [Chrysler300] 300 K (exhaust manifold coating)

[Bill Huff <czbill@xxxxxxxxxx>]

I've had it on my GTX manifolds for almost 15 
years.  It is dirty from my working on the engine 
but hasn't peeled off or deteriorated to any 
great degree. No visible rust. I had cleaned and 
baked the manifolds to remove all grease before 
painting.  I used a run for a minute and let it 
cool, then run for a longer period and let it 
cool type of baking formula for the paint.

Bill Huff


At 6/29/201005:07 PM, picgrego@xxxxxxx wrote:
>
>
>Anyone know of a coating for exhaust manifolds that will last. I have tried
>Eastwood's manifold coating. It doesn't last long. Greg
>
>[Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/