Re: [Chrysler300] 300 E

[Ray Jones <hurst300@xxxxxxxxxx>]

For those too young to know of them, a starter wrench is a "C" shaped wrench. This allows you to reach around the starter to get it on the bolt head and have room to work it despite the obstructions.
Generally, a box end wrench and still available in parts stores. Also, can be made from a straight wrench of the right size, using a torch to bend it round between the ends.
Very useful in other applications also. 
Like Gil, I've had mine for near 50 years. 
Ray



On Apr 18, 2010, at 2:04 PM, lettercars@xxxxxxx wrote:

Sounds like a job for a Starter Wrench. I don't even know if they are 
still available. Guess one could google it. I have owned mine for 40 years, 
I suppose. Doesn't get a lot of use!! Also very handy for one of the 
torqueflite to bell housing bolts, but can't remember which one now. 
300ly, Gil C.



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/