Re: [Chrysler300] 2903 carbs

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

  I have no direct experience with a 2903 carburetor that I remember but I do have faith in factory service bulletins. We check for bulletins on every vehicle we touch. Can avoid a lot of wasted time and money.

  Specification building a carburetor is always a good first step. Best results will be achieved with a good run on a dynamometer and then calibration coerrections and adjustments made. Specs do not always work and, from what I have seen, not frequently at all. This has also been my experience with every factory remanufactured carburetor I have worked with; always some area that is not working in an acceptable manner. and, after experiences too numerous to count, I will not even attempt fixing a factory reman carburetor. 

  Warren Anderson
  Sedona,AZ

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/