[Chrysler300] one more clutch question

[david dumais <dvd_dumais@xxxxxxxxx>]

hanks for the input on the heater control non/ac unit.  Back to the clutch. My last adjust ment seems in the ballpark.  No problem shifting, and it grabs a bit below the brake pedal height.
 
With the pedal in it's "high" position,  the back and forth play at the tip of the clutch fork about 1/4" to 3/8".  The manual recommends 5/32".
 
The key to this is play of 1" at the pedal. Is this with the pedal in the high position, 1" of play until begins to engage the throwout bearing to the clutch plate?
 
My pedal is now 1" above the brake pedal height.   Thanks guys. Dave  


 


      

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/