Hi jerry; It's really a pretty simple job. Several How to books out there to help. Paul's right with 3 to do, learn. You must pay attention, but if you have a big bench, slowly un-stack the parts, it just goes back in the reverse. Replace all wearables with new as you re-stack it. Watch your clearances, and have fun. Ray (I've done lots of them) On Feb 16, 2009, at 12:11 PM, Paul Holmgren wrote: I believe that I have read it here, if you have the space and the information, and some mechanical skills, maybe it's time to learn about doing it your self?? The cost might then fall in the $200-$300 range. -- Paul Holmgren [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: mailto:Chrysler300-digest@xxxxxxxxxxxxxxx mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/