Re: [Chrysler300] 57 heater control valve

[Kraus300@xxxxxxxxxxx]

The NAPA part number I have for the Ranko heater valve is BK660 1000. Cost is about $10. 
I hear rebuild costs range from $75-150.

I taped over the hose ends and glass beaded a few spare valves (before rebuilds). They seemed to clean up well with that.  

Jim Krausmann

-------------- Original message -------------- 
From: Bill Leahy <bleahy@xxxxxxxxxxx> 
one of the many things to improve or still fix in the first place is my 
heater control valve / it leaks badly.

so, i finally have it out of the car and it looks like trouble trouble 
trouble / rusty and carroded.

are they fixable or do ya replace them suckers?

or do ya block them off and close one eye?

billllllllll in not so sunny kennewick washington 


 

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/