Re: [Chrysler300] leaky axle seals

[Bill Huff <czbill@xxxxxxxxxx>]

Are you replacing both the inner and outer axle seals?  I agree, do 
not try to seat the inner seals, just put them in far enough to clear 
the bearing and be on a good portion of the axle sealing surface.  I 
haven't worked on that year for a looooong time, but the principals 
should be the same as the later 60's.

Bill Huff




At 8/12/200806:37 PM, bluesport62 wrote:

>hello in 300 land.. is there a special way to install rear axle seals.
>my shop is doing for the third time in as many months.he said he has
>the rite seals. but idont think so i will get them and try again. i
>have the part #s. please drop me a line if there is something i should
>know. besides changing shops. john hertog i sure miss you. thanks JOE
>LUCIANO 62 SPORT
>
>


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/