RE: [Chrysler300] power steering

["Gary Nelson" <gnelson@xxxxxxxxxxxx>]

Jimmy

If you do not have an owners manual you need one. It will tell you how to
make the adjustment to prevent self steer to hold a neutral position.
When a steering box is rebuilt the adjustment is lost. You can only do on a
bench tester or in the car motor running.
Thank you,
Gary, the parts doc
Reno, Nevada 89521 USA
The Biggest Little City In The World
Mail: garythepartsdoc@xxxxxxxxxxxx


  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of mindrgn127@xxxxxxxxxxx
  Sent: Sunday, July 20, 2008 2:44 PM
  To: Chrysler300@xxxxxxxxxxxxxxx
  Subject: [Chrysler300] power stearing


  Hello to all,

  I have replaced the power steering box in my 69 300 because it was
leaking.
  My son had a rebuilt one for his 66 300 so I used that one. When I put it
in
  and started the car the steering wheel spun itself to the left. Thinking
the
  box had sat too long and a valve was stuck, I ordered a new one. When I
put
  the new one in it once again shot to the left and then after about 5 min
of
  running shot to the right. It still does it but not as bad. If I hit the
gas
  it will turn about a quarter turn to the right each time and when driving
if
  I take my hand off the wheel it will shoot to the right. How can I fix
this?
  Is their air in the box and if so how do I get rid of it? All help would
be
  appreciated.

  Thanks Jimmy

  [Non-text portions of this message have been removed]



  


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/