[Chrysler300] power stearing

["mindrgn127@xxxxxxxxxxx" <minddrgn127@xxxxxxxxxxx>]

Hello to all,

 

I have replaced the power steering box in my 69 300 because it was leaking.
My son had a rebuilt one for his 66 300 so I used that one. When I put it in
and started the car the steering wheel spun itself to the left. Thinking the
box had sat too long and a valve was stuck, I ordered a new one. When I put
the new one in it once again shot to the left and then after about 5 min of
running shot to the right. It still does it but not as bad. If I hit the gas
it will turn about a quarter turn to the right each time and when driving if
I take my hand off the wheel it will shoot to the right. How can I fix this?
Is their air in the box and if so how do I get rid of it? All help would be
appreciated. 

 

Thanks Jimmy



[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/