[Chrysler300] vacuum power assist?

[Bill Leahy <bleahy@xxxxxxxxxxx>]

after getting much good info on brakes today from the 300 club 
members...i conclude that i am operating with no power brake vacuum 
assist.

it clearly feels like a car without power brakes.

so, how does one tell if the vacuum bellows jobbie is working or 
not...or leaking or whatever can go wrong?

i have been told that i has to be working for when i do the disk brake 
conversion...so first things first.

and how do i find out if the black vacuum reservoir is holding air?

thanks to all i will be a brake wizard before i am thru / but at the 
moment am still in the dark.

billlllll leahy in kennewick washington






------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/