Re: [Chrysler300] thanks to everyones responses so far!?s about working on y b

[Ray Jones <hurst300@xxxxxxxxxxx>]

I've had great success with White Vinegar. Pour some into each cylinder 
thru the plug hole, and let it sit while you disassemble the motor. If 
it takes a while before you get the heads off, add some every day or 
so.
Worked real well in some old 8N tractors I have.
Good luck,
Ray Jones
Mena, AR 71953


On Mar 14, 2008, at 9:53 AM, rdrnr6970@xxxxxxx wrote:

i put wd40 in the motor then,was going to move onto diesel fuel,as some 
car freinds had suggested.but while talking with a older mopar motor 
guy who works on his sons dragster,he told me not to keep forcing the 
crank as i could brake something.and i wouldnt be able to replace this 
block.thanks...john


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/