[Chrysler300] thanks to everyones responses so far!?s about working on y b

[rdrnr6970@xxxxxxx]

i appreciate everyones input so far!my b is rough but yes the rusted fenders,etc..are still on the car.last night i took out the rough/rusted radiator.and the carbs and intake are already off the hemi block.i started taking the motor apart because i couldnt turn the?m?otor manually,and was afraid if i kept trying to turn the crank and force it i might brake something!it would only turn slightly then stop.i put wd40 in the motor then,was going to move onto diesel fuel,as some car freinds had suggested.but while talking with a older mopar motor guy who works on his sons dragster,he told me not to keep forcing the crank as i could brake something.and i wouldnt be able to replace this block.thanks...john


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/