Re: [Chrysler300] Warning to F and G owners

["Ron Waters" <ronbo97@xxxxxxxxxxx>]

One possible way of determining this would be to pore through the Technical
Service Bulletins for 57 Chrysler. Usually stuff like that is mentioned as
an addition or change.

Ron


> Pete, et al,
>     Very interesting info. regarding the windshield upper molding.
Recently (at the Lawton Meet) it was pointed out to me that the upper
windshield stainless molding on my C was perhaps incorrectly mounted since
the ends were affixed wirh screws. Was this a modification made by a
previous owner during restoration without the proper clips?  Could this been
from the factory since my C was a late August '57 car and there was a
shortage of clips and this was the factory remedy to just get the car
shipped to the dealer? Or could this have been out of necessity after one
flying off at any speed? An interesting validation car was the '57 DeSoto
Adventurer hardtop seen this summer at '57 Heaven in Branson, MO.  It had an
identicle screw arrangement at the corners of the upper windshield molding
that I have!  See you in Springfield!  ROB KERN



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/