Re: [Chrysler300] Warning to F and G owners

[moparpjf@xxxxxxx]

In a message dated 9/24/2007 2:25:56 P.M. Eastern Daylight Time,  
richard@xxxxxxxxxxxx writes:


When  I got home, I learned that the noise was from the upper windshield 
molding.  The right side screw had popped out and the trim swung around pivoting 
on the  left side screw. It scratched up the roof a little, but at least it 
didn't fly  off. I think it can be reused.

So, I noticed the last couple of times I  washed the car that I had to push 
the trim back down, I just didn't pay  attention to the true cause. Probably 
could have avoided another trip to the  body shop if I had "listened" to the car 
better before this  happened.



I lost the molding twice on my K - finally realized that as your speed  
increases, so does the vacuum built up just at the top of the  windshield (either 
that or the wind is getting under the molding).  In  either event, in addition 
to screwing the ends down, I found that a piece of  double sided tape running 
the length of the molding strip solves the problem  once and for all.
 
Pete Fitch



************************************** See what's new at http://www.aol.com


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/