Re: [Chrysler300] Drive shaft whip

[Sean Duggan <saduggan@xxxxxxxxxxxxx>]

I had my driveshaft converted at cannon engineering in north  
hollywood on Chandler. They do have to cut the driveshaft and add a  
slipyoke. If you want to keep everything original, not a good thing  
to do, but they may be able to make you up a whole new driveshaft.  
I'm very happy with the results. I built my engine with 500+ hp and  
have not had any problems.

Sean Duggan

On Sep 9, 2007, at 11:54 AM, JettLarry@xxxxxxx wrote:

> I drove the F 220 miles round trip to educate the citizens of  
> Cloverdale in
> the wine country. First place in the 60-65 group! The drive shaft  
> has quite
> a whip on lift-off around 70 mph. Remember previous chat about a more
> modern front U joint for the F's. Can anyone remiind me how and  
> where this gets
> done?
>
> ************************************** See what's new at http:// 
> www.aol.com
>
> [Non-text portions of this message have been removed]
>
>
> 



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/