RE: [Chrysler300] 57 392 Water Pump

["John L. Chesnutt" <chesnutt@xxxxxxxxxxxx>]

The two 57 water pumps I have cast impellers.  I have never seem a plastic
impeller on a Chrysler water pump. Automotive Fiction Co, Clackamas, Oregon
503-353-7595 rebuilt 57/58 water pumps for two of our West Coast members
this year. Cost is about $54.00

John Chesnutt


-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Dave Geise
Sent: Friday, August 03, 2007 6:39 PM
To: Chrysler300
Subject: [Chrysler300] 57 392 Water Pump

Hi To All
     When repairing a 392 water pump, the FSM tells you to break away 
the plastic impeller allowing access to the seal. Further, a note states 
that it is not necessary to remove the shaft and bearing to fix a 
leaking pump.  Upon removing my  pump for a leak, I found a cast 
impeller.  The alternate procedure not spelled out in the FSM is as 
follows.  Some of you may already know this but some may not.  As the 
impeller is not strong enough to use a puller, snake a cutting torch in 
the weep hole and cut thru the shaft. This will allow the impeller to 
fall away.  The shaft pieces can then be pressed out of their respective 
bores.  All you need then is a new shaft, bearing and seal retaining the 
old impeller. Don't know what percentage of pumps have plastic vs. cast 
impellers.

                Best Regards,
                Dave Geise   57C in NJ


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links






To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/