Re: [Chrysler300] 300 G Hot Coil
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 G Hot Coil



Hi Lauren

Whatever modern replacement coil that you get should be epoxy filled. Modern
oil filled coils are meant to mount vertically. They burn out when mounted
horizontally.

If you get an older original type coil, then oil filled is OK.

Tony Rinaldi
300-F conv¹t



From: Lauren Lampi <lampi300@xxxxxxx>
Date: Sun, 15 Apr 2007 22:27:27 -0500
To: chrysler300 <chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] 300 G Hot Coil

 
 
 

Hi again 300 group,

Thanks for the information on Hot coil.

Tried the 300G again this morning.

Adjusted the timing a bit.   Turned the distributor a little CCW.

Engine turned over easily and started quickly.  As usual.

Wanted to check the coil as far a heating up.

After running about 1 minute, I noticed that the coil was beginning to get
warm.

The top of the coil was beginning to warm up noticeably, while the bottom of
the coil was normal temperature.

(Coil in the normal, installed position on the top of the ram intake.
Positive terminal + to the passenger side and Negative terminal to the
drivers side.)

After about 2 minutes the top of the coil is getting hotter and the bottom
of the 
coil is still normal temp.

After about 3 minutes the top of the coil is getting HOT and the bottom is
getting warmer.

After about 4 minutes the top of the Coil is getting VERY HOT (one second
touch)  and the bottom
is getting warmer.

Shut down the engine and let it cool down.

This is a Mopar Performance Coil.

Look in the parts box and find the old coil  (NAPA high performance coil).

Install the old coil.

Fire up the engine, Play around with the timing as it warms up.

Check the coil after a minute or so and it is getting warm like the other
one.

The top is getting hotter and the bottom is staying cooler.

Shut it down and try to figure out what is going on.

Why would the coil heat up after 2 to 3 minutes of running?

Wiring?  Ballast Resistor?  Wrong Resistor?  No Resistor?

How hot can a coil get and still function?  How Long Will it last?

I need to figure out the Hot Coil and then get Fatter Cables and check

out the starter.

Thanks for the Help,

Lauren R Lampi.
Grand Rapids, MN
300G

[Non-text portions of this message have been removed]

 
    



[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.