[Chrysler300] New Drive shaft balance

[Gary Barker <gbarker@xxxxxxxxxxxx>]

I just had the Drive shaft on my 63 changed over.  I got to watch the 
drive shaft being balanced.  They took it up to 10,000rpm.  They would 
add very small things to the shaft so I could see what it would do.  
They took a very small washer about 1/4 inch in dia. and  taped it on.  
At 10,000 it would move the shaft about .006" out of round.   Very 
interesting.  The man doing the balancing will not  balance it if it has 
paint on it.

                  Gary Barker


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/