
RE: [Chrysler300] hood corners on 58D
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Chrysler300] hood corners on 58D
- From: "Tony Bevacqua" <tonysru2@xxxxxxxxxxx>
- Date: Sun, 30 Jul 2006 10:48:32 -0700
This was on the list very recently. I wrote it down for myself and deleted
the post. It said:
Loosen the 2 bolts (2 per side) working one side at a time, and insert a
washer (or two, whatever works) between the hinge (front bolt only) and the
hood, then tighten everything back down.
Tony
-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of whuff
Sent: Sunday, July 30, 2006 10:35 AM
To: David Zakarian; chrysler club
Subject: Re: [Chrysler300] hood corners on 58D
Its been a long time since I messed with hood adjustment, but I seem
to recall that lowering the front adjustment of the hood hinges will
lower the back corners. Other than that the hinges might have slack
in the rivets.
Bill Huff
At 7/30/2006 12:01 PM, David Zakarian wrote:
>OK, here is the problem of the week. I just put the hood on the D.
>When the hood is closed, both corners nearest to the windshield see
>to hang up in the air about 1/4 inch. When I apply downward pressure
>on them they go into place and line up with all the other
>surrounding surfaces. What am I doing wrong. This is the 3rd one
>I've rebuilt and this is the first time for this problem.
>
>Zak
>
>--
>----------------------------------------
>I am using the free version of SPAMfighter for private users.<br
>/>It has removed 9405 spam emails to date.<br />Paying users do not
>have this message in their emails.<br />Get the free SPAMfighter
>here: <http://www.spamfighter.com/len>http://www.spamfighter.com/len<br />
>
>[Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap