[Chrysler300] Front Shocks Install - '65 Chryslers

["Ryan Hill" <ryan_hillc300@xxxxxxxxxxx>]

Can someone clarify if the front shocks on a '65 300 should pass through the 
lower control arm to be installed or if they need to be fed up into the 
shock sleeve by angling it in from ahead of the lower control arm. I 
recalled the later being the procedure but it's been years and the 
shock.....she just don't fit!

I have the suspension hanging as much as possible, I even removed the 
snubber from the upper control arm, but there just doesn't seem to be near 
enough clearance to sneak it in. Seems wrong to have to pop out the lower 
ball joint.

Ryan Hill in Vancouver




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/