[Chrysler300] Neutral Safety Switch

[JettLarry@xxxxxxx]

Today I tried unsuccessfully to replace the neutral safety switch in my 66  
300.  I believe that the switch is the same as the 300L and maybe even  others. 
 It is a single post number that allows only cranking in Park or  Neutral by 
sending a negative signal to the starting solenoid when in these two  gears.  
Not NAPA nor my usually reliable 40's looking parts store, using  only 
catalogs without computers, even listed the 59-68 Chrysler number.   They do list the 
vacuum switch for the 58 but then are blank until 69 to 84  models.  I did 
purchase a 69 version with it's longer height and with 3  pins on top and it 
does work properly and the center post shows a ground in Park  and Neutral.  
Anybody aware of this shortage and have a source for the  correct switch?


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Protect your PC from spy ware with award winning anti spy technology. It's free.
http://us.click.yahoo.com/97bhrC/LGxNAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/