RE: [Chrysler300] 440 TNT Exhaust manifold

["Rich barber" <c300@xxxxxxx>]

Does anyone recall an article about Kiekhaefer or others using Dodge truck
exhaust manifolds on the 331 C-300 engine?  Also, I could use some
confirmation of proper exhaust piping size for the C-300.  2" all the way?
And was this different from a NY'er or Imperial with dual exhaust?

C-300'ly,
Rich Barber
Brentwood, CA (Spring has sprung here--trees in blossom--75 degrees in the
shade at 2PM)


Hello 300 Fans - Phil Irish here.  When I made my "Kit Kar  300" from my 69 
Newport coupe, I stumbled on a set of these manifolds to  add to my TNT
rebuild 
of the 440.  Having done the entire engine in one  effort, it is difficult
to 
say how much they add, but the whole engine response  is noticeably better.
I 
do know Carl K. of early 300 racing fame, believed good  exhaust manifolds 
and pipes were worth 50 HP on the 392 cu in engine. They are  impressive to
see 
on the engine and I've never failed to get questions about  them when the 
person looking had any engine knowledge at all.  I do not  have the part
numbers 
but will say I've never seen them offered at a swap meet,  or on ebay.  I 
suspect finding a complete TNT engine would be the only way  to get a set.
I only 
know of one of those - and I don't think it is for  sale.  Good luck in your

search !

             All the Best  300ing,

                                                               Phil - snowy 
38F outside  Memphis                                            .





To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/