[Chrysler300] 7mm wires for 300 Hemi (55 to 58)

[c300c@xxxxxxx]

Subject: Re: [Chrysler300] 7mm wire


Go to Carquest and get a set of #3802 wires. Black, 7mm, all the  correct 
ends are included. You must slide off the long rubber insulator and  remove the 
small spring on the spark plug end. Slide thru your ceramic insulator  ( make 
sure the wire end grips the plug snugly, adjust as needed), cut to fit  and 
install the distributor ends.
 
Gary Hagy, 
300-C conv.
Hamburg, PA



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Has someone you know been affected by illness or disease?
Network for Good is THE place to support health awareness efforts!
http://us.click.yahoo.com/0xaSZB/UOnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/