Re: [Chrysler300] Exhaust Pipe Suppliers

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

The only place I was aware of (at the time) that made the exhaust
pipes for my Brute was Eileen Brass. I ordered a set from her. The
installation was marked by only very, very minor adjustments
required of the installer. However, on driving it a decided rattle
was present at times under accleration.

The cause was the left-hand exhaust pipe being too close to the
torsion bar assembly -- about 1/4" or less clearance. A simple
adjustmenet to that area of the exhaust pipe, and everything was
fine.

Mike

There are many applications (new and old) that need very special tweaks for
clearancing. The left torsion bar area on a '65 is one I know about
personally. Some of these necessary tweaks are impossible to make without
special tooling. Custom shops of  even the highest calibre will, therefore,
have difficulty dealing with many of these areas.
Can be done; experience, time, machinery and materials.

Warren Anderson
Sedona,AZ



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/