[Chrysler300] Exhaust Pipe Suppliers

["Michael Reed" <mrreed@xxxxxxxxxxxxxx>]

Might as well throw my 2¢ worth in on exhaust pipes....

When I retrieved my "F" last fall from it's 21-year hiatus in a 
museum, the exhaust system was rusted out from the manifolds thru 
the mufflers.

The only place I was aware of (at the time) that made the exhaust 
pipes for my Brute was Eileen Brass. I ordered a set from her. The 
installation was marked by only very, very minor adjustments 
required of the installer. However, on driving it a decided rattle 
was present at times under accleration.

The cause was the left-hand exhaust pipe being too close to the 
torsion bar assembly -- about 1/4" or less clearance. A simple 
adjustmenet to that area of the exhaust pipe, and everything was 
fine.

Mike





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Help save the life of a child.  Support St. Jude Children's Research Hospital's
'Thanks & Giving.'
http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/