Re: [Chrysler300] '62 Linkage Measurement

[Mike Apfelbeck <moparmike@xxxx>]

One way to do it is to trace out the desired angle on a piece of cardboard 
with a grade school protractor and cut it out for a pattern you can fit on 
the floor and against the pedal. I usually adjust the linkage for full 
throttle opening, with the gas pedal just touching the floor mat first, 
then I check to see what the angle is.
Mike

At 06:30 AM 7/29/2003 -0700, jennifer allyn wrote:
> How does one accomplish the angle measurement between the drivers floor
> & the gas pedal when adjusting out the throttle linkage?
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/