RE: [Chrysler300] Master Cylinder Acting Up

[Mark Souders <souders@xxxx>]

Hi,
I have the exact same problem with my H. It's supposed to be an NOS master
cylinder, that means it's over 40 years old. I'm thinking it must be
replaced.

Mark Souders


> -----Original Message-----
> From:	Frank Bakanau [SMTP:FBAKANAU@xxxx]
> Sent:	Thursday, May 08, 2003 8:24 PM
> To:	chrysler
> Subject:	[Chrysler300] Master Cylinder Acting Up
> 
> I've replaced the wheel cylinders on my C-300 and flushed the system and
> replaced the fluid with silicone type. (I like the silicone brake fluid
> cuzz it does not absorb moisture which we have a lot of here on Oregon.)
> But after I drive the car a bit, the petal gets very hard, the brakes drag
> and the stop lights stay on. Hmmm.... So I just crack the fitting loose on
> the master cylinder, I get squirt of fluid and all is fine for a while.
> I
> suspect it's a check valve problem in the master cylinder, but before I go
> tearing into it, anyone have sage advice?
> 
> Frank
> 
> 
> 
> 
> Yahoo! Groups Sponsor	
> ADVERTISEMENT
> 
> <http://rd.yahoo.com/M=245454.3115308.4434529.1261774/D=egroupweb/S=170671
> 3852:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>	
> 
> <http://us.adserver.yahoo.com/l?M=245454.3115308.4434529.1261774/D=egroupm
> ail/S=:HM/A=1457554/rand=476441986>	
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> <http://www.chrysler300club.com/yahoolist/inst.htm> 
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>. 


[Non-text portions of this message have been removed]