Re: [Chrysler300] tranny

["Don Verity" <d.verity@xxxx>]

Hi Ben,
If the cable is shifting it through all the positions as you say, the unit
will have to come back out. It's most likely that the rebuilder broke a
sealing ring during assembly. This could possibly be fixed in the car, but
it would be much easier with the unit on the bench.
300ly,
Don
----- Original Message -----
From: Ben Meisner <meisnerinc@xxxx>
To: Chrysler 300 <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Saturday, April 12, 2003 12:47 AM
Subject: [Chrysler300] tranny


> Folks ;
>
> Just one more time ; Torque flight tranny. I had the tranny re built . It
will go into reverse but not into "D" , 1 or 2 . I removed the safety switch
and looked in there the cable is moving through all the gears , but doesn't
shift into any forward speeds. . Now I would like to say to the tranny guy,
" listen Buster this is what's wrong " , better yet fix it myself .
Help......
>
> Thanks again
> Ben Meisner
> 1959 E
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>