Re: [Chrysler300] [Fwd: size and spacing of 300k pin stripping]

["Kelly Pierce" <jkrestor300@xxxx>]

Greetings Group!
I measured mine on my Roman Red hardtop prior to starting on the body
work three years ago, and saved it all this time, and I amazed myself that I
found where I wrote it down- Like Johnny Rivers said "wrote it on the wall"
next to my tool boxes! Wide stripe is 1/4", spaced by 1/8", small stripe is
1/8". I have another K out back that has been repainted years ago and it has
2 1/8" stripes. I also have a fender and door off a K hardtop, no evidence
of repaint on either and they have the same as our Roman Red (Kelly's K)
hardtop- 1/4"x 1/8"x1/8". Joe Pierce 300J+Kx3+others...
----- Original Message -----
From: "Rinda Van Lennep" <ednavan9@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, April 07, 2003 7:27 PM
Subject: [Chrysler300] [Fwd: size and spacing of 300k pin stripping]


> I know someone has answered this question before but I have lost the
> answer. What are the widths of the two pin stripes and the distance
> between them for a 300k. I am referring to the stripping that runs the
> length of the side an a little around the front and back.
>
> Thanks
>
> Van Lennep
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>