Re: [Chrysler300] question for 57 300C a/c experts

[Philippe Courant <accf-club@xxxx>]

> but I have no hose connected to the 'drain port' on the unit.
On power piston you must have two hoses: one which goes to the solenoid 
and another (drain ) which goes to ... nothing !! The two hoses are 
routed through the firewall (grommets). The "drain" hose hangs along the 
solenoid and the end is 4 inches below it. So if ther's some oil drained 
through this hose it will drop along the firewall...
Note that you've another "hose" which goes to oil pan (or rather oil 
filler tube) but this hose comes from the solenoid. This is not a rubber 
hose, except at solenoid end. This oil line (same as oil line coming 
from the rear of engine to the solenoid) runs along the left valve cover.
I've perhaps one or 2 pics if you need.

--

Philippe COURANT (Pau, France)- Webmaster des sites ACCF et C-I-F
Imperial 1957 Crown convertible
Buick 1996 Roadmaster wagon

- American Car Club de France (ACCF) : http://www.accf.com

- Chrysler Imperial France (C-I-F) : http://www.ifrance.com/c-i-f

- Cadillac " Standard of Excellence " : http://www.ifrance.com/accf-cad

- SportsCars : http://www.ifrance.com/accf-sprtcar