Re: [Chrysler300] Rims for a D

[Redwoodlse@xxxx]

In a message dated 3/24/03 4:34:24 PM Pacific Standard Time, 
gbarker@xxxx writes:


The 14 inch HD wheel used on our Brutes have a 14 x 6.5 wheel used with 
station wagons, probably police and/or taxis. A thin metal tape measurer 
inserted in any of the four cooling spaces and hooked on the inside bead will 
measure 8 7/8 inches to the outside bead. This with a tire mounted so you 
can't just measure 6.5 inches between the inside upright beads. Should 
anybody find same in a pile at a wrecking yard, they would be well advised to 
buy and stockpile. I have a 6.5 in my garage with a 9 inch split on the 
inside bead caused by old age, metal fatigue, radial tires and/or driving too 
dang fast. These wheels aren't going to last forever. Might some bright 
manufacturer be interested in making some NORS wheels?

Larry Jett, the number two registrant at the Battle Creek hotel.