Fw: [Chrysler300] heater door

["BRUCE NAIMY" <brucenaimy@xxxx>]

 Perhaps you can order from Goers. If not, try this:
If you have most of the rubber left but cracked and brittle, try several
coats of that tool handle liquid dip.All the 59 and 60 heaters I've seen use
the same door.Sombody should have one with enough rubber left on it for the
above cure to work.
Bruce Naimy

----- Original Message -----
From: "Ben Meisner" <meisnerinc@xxxx>
To: "Chrysler 300" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Saturday, January 11, 2003 1:02 PM
Subject: [Chrysler300] heater door


> club:
>
> Does anyone know were to can buy a fresh air door for a 707 model heater
or can you have them re built ? and were ? .It was listed in my book as
Chrysler part no.1830-632 . the model 706, and 708 also used the same door.
> many thanks . Is just like waiting for a baby I'm getting closer and
closer !!!!.
> Ben Meisner
>
>
> [Non-text portions of this message have been removed]
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>