
Re: [Chrysler300] More Oil Stuff...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] More Oil Stuff...
- From: Bob Jasinski <rpjasin@xxxx>
- Date: Thu, 11 Jul 2002 08:38:37 -0700
Andy and list,
My daily driver is an older MB 300SD Diesel. I use Chevron Delo 400, 15W40 in it. The last time I changed oil in th 300G I put in the Delo. The Delo 400 has a rating of CH4-SJ, which classifies it as being suitable for both gas and diesel. Diesels, by their nature, are more demanding on an oil than a gas motor is in general.
Go to this site:
http://www.chevron.com/prodserv/nafl/auto/content/motoroils.shtm#delo
It has some interesting info on Delo and oil ratings in particular.
Bob J
----- Original Message -----
From: Andy Mikonis
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Thursday, July 11, 2002 8:05 AM
Subject: Re: [Chrysler300] More Oil Stuff...
I was always taught to go with the single grade oil,
too. I spent my formative car-owning years in Florida
and this was thought to be best in that hot climate.
But I read something interesting:
Patrick Bedard, in the November 1999 Car and Driver
quotes an Ed Kollin of Lubrication Sciences; he makes
custom blended oils, and Bedard asks him about the
best oil for an occasionally driven 'keeper car.'
He says oil has gradually evolved; the amount of the
primary anti-wear additive zinc dialkyl
dithiophosphate (ZDDP) has been reduced by 25% because
it is harful to catalysts. Also, he says gas
additives MTBE and ethanol dilute oil by 5 to 10% and
are very corrosive to the materials used in older
engines. He suggests corrosion is the worst enemy for
our cars - more so than wear at startup.
His "off-the-shelf" solution: "C" grade 15W-40 oil for
diesel engines. Why?
1. The "oil part" is the same, and 15W-40 is thicker.
2. 80% more ZDDP.
2. 30-50% more corrosion inhibitors and detergents:
these oils are designed to neutralize the sulfuric
acid produced by diesel fuel - this takes care of the
corrsion problem. He also says the higher detergents
will free up sticky rings "quickly."
He cautions "nitrogen compounds in the high dose of
dispersant may cause some seals to leak." Also, if a
non-detergent oil was used before, the detergents will
knock "chunks of sludge loose", possibly clogging
lifters.
Interesting stuff. I don't know anything about it.
Haven't tried it yet. Thought about it. Comments?
Andy
__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
Back to the Home of the Forward Look Network
Archive Sitemap