Re: [Chrysler300] Fuel line flare?

["Owen & Jo Grigg" <ram300@xxxx>]

Mike and all,
Thanks for all your help with this, I better explain myself better, this is
not a brake line flare. The best comparison I can think of is the water
outlets on a radiator. It "bulges" out near the end, to stop the hose clip
from slipping.
Owen
----- Original Message -----
From: Mike Apfelbeck <moparmike@xxxx>
To: Owen & Jo Grigg <ram300@xxxx>; <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, July 07, 2002 4:40 AM
Subject: Re: [Chrysler300] Fuel line flare?


> It's called a "double flaring tool" it should be available at most parts
> houses or tool rental outfits. They are easy to figure out and with a
> little practice you can turn out some really nice looking fuel and brake
> lines.If you work it just right, you can use it to recreate the little
> bulge on the end of the tube where rubber hose slips over to connect it to
> the tank.
>
> Mike
>
> At 12:12 PM 7/6/02 +1200, Owen & Jo Grigg wrote:
> >My old 300C fuel line has a type of internal flare (sorry I don't know
the
> >correct name) on the pump end, should it have one on the tank end as
well?
> >Also how the heck do I put these in the new line, what sort of tool do I
> >need and where can I get one? Been told it is similar to a "crox tool"(?)
> >that they use in plumbing but would have to be much smaller for a 5/16
> >fuel line.
> >Thanks in advance for the help.
> >Owen
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >To send a message to this group, send an email to:
> >Chrysler300@xxxxxxxxxxxxxxx
> >
> >For list server instructions, go to
> >http://www.chrysler300club.com/yahoolist/inst.htm
> >
> >To unsubscribe from this group, send an email to:
> >Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>