Changing sway bar bushings

[SADuggan@xxxx]

Hi Everyone,
I see the subject of Swaybar has come up recently. I know that Addco has 
a heavy duty swaybar for our cars, but I haven't tried one. They say it come 
with all the parts to install it, just not the frame brackets. It's a 1" bar.

I wanted to see if anyone had a better way of changing the swaybar 
bushings. Changing the bushings in the frame brackets I had a hard time. At 
first I hope to be able to change them without undoing the weld, not 
happening. I drilled out the weld on the press with a 1/2" drill bit, then 
snaped out the bottom piece. I then pushed the new bushing up in there, 
clamped it, and filled in the hole with weld. As it goes with these things, 
the first one looks O.K., but the second one's much better.

I have still yet to do the bushings on the brackets that clamp to the 
struts. Is there a better way to do this?

Thanks,
Sean Duggan