Re: [Chrysler300] 63-64 Chrysler front suspention parts

["Terry & Emily Lynch" <terrytown@xxxx>]

I ran into a similar head scratcher when I purchased an idler arm from PST.
The guy says that the one from a hardtop '64 300 is different from the one
my convertible '64 300 needs. I haven't installed the part yet, but hope the
one he sold me is the right one. ( I was going to say that I'm waiting for
warmer weather, but I suspect that y'all up north don't want to her that!)
Any thoughts on why the difference?

Joe, did you ever figgure out what the difference between 63 & 64 were?

Terry
'64 300 'vert (sport)

Emily & Terry Lynch
St. Petersburg, FL

E-Mail : lynch813@xxxx

----- Original Message -----
From: "Kelly Pierce" <jkrestor300@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, February 10, 2002 1:08 AM
Subject: [Chrysler300] 63-64 Chrysler front suspention parts


> Hello All!
> Please forgive me if this sounds like a stupid question- But what did
Chrysler change in all the front end parts in 63? Looking in the parts books
for 63&4 all the part numbers change-such as tie rod ends, idler arm, drag
link etc. Looking at the parts they appear to be the same, but all the books
say a different part #- even the after market stuff! Can any one explain
what the difference is? And /or why? Thanks, Joe Pierce. Numerous 64's
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>