FW: Re: [Chrysler300] Intake Manifold

["James McMullan" <macthehammer@xxxxxxxxxxxxx>]

James McMullan
macthehammer@xxxxxxxxxxxxx
Why Wait?  Move to EarthLink.


> [Original Message]
> From: James McMullan <macthehammer@xxxxxxxxxxxxx>
> To: mr-320@xxxxxxxxx <mr-320@xxxxxxxxx>
> Date: 1/4/2005 7:17:31 AM
> Subject: Re: [Chrysler300] Intake Manifold
>
> There are plenty of F/I cars and trucks in the wrecking yards.Find one
with the same size engine ,strip off all the F/I stuff ,including the
computer,fuel pump.rails ,senders ect.Weld up some bosses ,drill and clamp
for injectors.What?? a couple 100 bucks and some fun time? Jim McMullan 300
F calif.
>
>
> > [Original Message]
> > From: <mr-320@xxxxxxxxx>
> > To: <jpmiklas@xxxxxxxxxxxxxxxxx (Jess)>
> > Cc: <Chrysler300@xxxxxxxxxxxxxxx>
> > Date: 1/4/2005 5:33:35 AM
> > Subject: Re: [Chrysler300] Intake Manifold
> >
> >
> > jeff to jeff;
> >             i believe that you are 100% right about injection, long as
> > it is sized large enough. only problem is that i can build a whole
> > stroker 500 incher for the cost of f/i on it...
> >
> >                                                      JEFF
> >                                                       tucson az.
> >
> >
> >
> > To send a message to this group, send an email to:
> > Chrysler300@xxxxxxxxxxxxxxx
> >
> > For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm 
> > Yahoo! Groups Links
> >
> >
> >
> >  
> >
> >
> >




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/